PERRIN Wheel Spacers by H&R
PERRIN Wheel Spacers move your wheels and tires outwards so they are more flush with the fender––instantly giving your vehicle the perfect stance!
|
|
The Perfect Fit
PERRIN wheel spacers feature a ‘perfect fit’ hub-centric design that makes the spacer function as a precise extension of the axle hub, thereby guaranteeing precision wheel fitment.
|
|
Superior Strength
Constructed from a proprietary aluminum/magnesium alloy PERRIN spacers are engineered, and manufactured by H&R Special Springs in Germany.
|
|
Corrosion Protection
PERRIN Wheel Spacers are extraordinarily strong and lightweight. Additionally, they feature a hard anodized coating for surface durability.
|
|
How To Measure
Place a straight edge flush with the face of the wheel and tire combination. Make sure the straight edge touches the tire in two spots to keep the straight edge even with the tire. Use the measuring device to measure from the inside of the straight edge to the inner fender lip. (see illustration) Make sure that the measurement is taken at the point where the wheel and tire is closest to the fender. For instance, on a car with a large amount of negative camber the tire and wheel may be closest at the front or rear edge of the fender.
|
|
Before & After
Staggered the offset. On our 2011 STI we found that for the best look and fitment, we used a 20mm spacer in the front and a 15mm spacer in the rear.
|
|
5 Year Warranty
PERRIN Performance warrants to the original purchaser, all PERRIN products to be free from defects in material and workmanship within a sixty (60) months period from the date of manufacture. *Some exclusions apply
» Read Full Warranty
|
|
Off Road Note
NOTE: This item may be for off-road use only in your area.
See Terms and Conditions prior to ordering!
» Learn More
|
